16Mn High Temperature Material Handling Blower Anti-Explosion
Introduction
6-12 series high-pressure heavy-duty centrifugal fan, suitable for conveying non-flammable gas and granule/powder/chip/fiber material at normal temperature or high temperature.
Bearing cooling method: according to gas temperature and operating environment conditions choose low-cost water-cooling method or oil-cooling method with good heat dissipation performance.
For extremely high temperature operating conditions, can also be installed with an electronic cooler, absolute protection of the reliable operation of the fan system.
Detail introduction
1. The blade placement angle is optimized, more wear-resistant and longer service life.
2. Each component has an installation number. Under the guidance of the installation manual, the system assembly can be completed smoothly.
3. It can be used to transport normal temperature or high temperature clean gas, dusty gas, flammable gas, corrosive gas, powder or granular materials, fiber materials, etc.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
| 6-12 | 3.15D | 1600～3150 | 354～1880 | 755～3323 | 0.75～3 |
| 4D | 1250～2500 | 345～1933 | 1184～5495 | 0.75～4 |
| 5D | 1400～2000 | 675～1953 | 2487～8623 | 2.2～7.5 |
| 6.3D | 1000～1600 | 344～1985 | 1776～13799 | 1.1～11 |
| 8D | 1120～1400 | 547～1517 | 3554～12074 | 3～7.5 |
| 10D | 800～1250 | 350～1953 | 2843～22075 | 1.5～15 |
| 12.5D | 400～1000 | 350～2043 | 7402～56902 | 2.2～22 |
Product Features
1. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste.
2. The bearing housing is reserved for the installation position of temperature and vibration sensors, which can facilitate the installation of fan operation monitoring device.
3. After running test and vibration value detection, the operation is reliable.
FAQ
1,What parameters need to be provided when you design the industrial centrifugal fans?
A: Air flow, total pressure or static pressure, inlet temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the medium, please also inform the designer.
2,How about your company’s pre-sales service and after-sales service?
A: Before our cooperation, we have the professional technical team to help you make the technical solution according to your working condition, to make sure the centrifugal fan efficiency operation.
After sales service, we will offer 12 months’ repairing service, and provide lifelong follow-up services. Besides, our engineers are available for going abroad to offer the repairing service.
3,Does your company have qualifications?
A: SIMO Blower has obtained ISO 9001-2008, CE, TUV certifications and so on.
Product Tags:
|
|
16Mn High Temperature Material Handling Blower Anti Explosion Images
|
